Posted on / by admin

How To Enable Network Connection in Windows

How to Disable or Enable Network Adapter in Windows 7,8,10

How to disable or enable network adapter in Windows 7,8,10? This is fairly simple and handy task. Here are some scenarios that you might want to perform this task:

– Disable and re-enable network adapter can be used to reconnect your computer to network sometimes if suddenly it fails connecting to network. This approach especially works on wireless adapter if it fails to detect any available wireless network initially.
– Enable the network adapter (wireless or wired) in order to connect that adapter to the network if it’s in disable mode.
– Disable unused network adapter if there are different network adapters (wireless or wired) installed on your computer or laptop.

Let’s explore how to disable and enable network adapter here:

1) Locate the network icon which is located at lower right corner as shown below, click on it and proceed to click Open Network and Sharing Center.

Note: You can also open this Network and Sharing Center by clicking on Start -> Control Panel -> View network status and tasks

Windows 7 network icon

2) Once Network and Sharing Center windows is opened, click on Change adapter settings.

change adapter settings in Network and Sharing Center Windows 7

3) Here you will be able to locate wired or wireless network adapters available on your computer, you can go ahead to right click the adapter icon to enable or disable it. That’s it and you’re done!

Example 1: Let say if you wish to connect your computer to wireless network only, and so you can right click your wired network adapter (Local Area Connection) and click on Disable to disable it since you are not going to use it.

disable network adapter

Example 2: If you need to connect your computer to network with wired connection later, come back to this network adapter window, right click your wired network adapter (Local Area Connection) again and click on Enable to enable it. You might also notice that Disabled wording is tied to the adapter if it’s in disable mode.

enable network adapter

HOW TO REPAIR A NETWORK CONNECTION IN WINDOWS 7,8,10

Windows 7 is designed for networking and working with the Internet, so when your network connection isn’t working, it can be particularly frustrating. Fortunately, Windows 7 comes with a built-in troubleshooter that you can use to repair a broken network connection.

  1. Choose Start→Control Panel→Network and Internet. Then click the Network and Sharing Center link.

  2. Click the Fix a Network Problem link.

    Windows Control Panel’s Troubleshooting guide for the network.

    The link pulls you straight into the Control Panel’s Troubleshooting guide for the network.

  3. Click the link for the type of network connection that has been lost.

    There are several different troubleshooters available:

    • Internet Connections: When you can’t connect to the Internet or to a particular Web site

    • Connection to a Shared Folder: When you can’t connect to a file or folder that you thought was shared

    • HomeGroup: When you’re unable to view files or computers in your homegroup

    • Network Adapter: When you’re unable to communicate with your router or modem

    • Incoming Connections to This Computer: When you’re unable to let other computers in your network communicate with your PC

  4. Work your way through the troubleshooting guide.

    The troubleshooting guide to solve any internet problems on a Windows.

    Windows 7 will ask you a series of questions. As you respond, you’ll get closer and closer to the answer. If Windows suggests an action you must perform, such as plugging in a cable, do so.

  5. When the solution is found, close the Network troubleshooting guide.

Tags:how to enable network connection in windows 10,how to enable network connection in windows 8,how to enable network connection in windows 7,enable network adapter windows 10,have to disable and enable network adapter windows 10,how to enable wireless network in windows 7,local area connection adapter is disabled windows 7

Leave a Reply

error: Content is protected !!